The VOLT 4 offers both volume and program settings to help you adapt to various listening situations. It uses a multi-function control switch that serves as volume control and program control.
In this article, we'll discuss:
How to Change the Volume
To change the volume, press and quickly release the switch. If you quickly press the upper button, you will increase the volume. If you quickly press the lower button, you will decrease the volume.
Gradually adjust the volume until you reach a comfortable level where you can hear sounds clearly without discomfort or distortion.
- A single, short beep indicates each volume change.
- Two short beeps indicate when minimum ad maximum volume is reached.
How to Change the Program
To change the program, press and hold the switch for 3 seconds. The number of beeps will indicate which program you are on. One beep for program 1, two beeps for program 2, etc.
How to Turn the VOLT 4 On/Off
The hearing aid will automatically turn off when placed in the charging case, and turn on when you remove it from the case.
When the hearing aid is turned back on, it will delay 5 seconds before providing any sound. It will give 5 long beeps and then restore the last-used volume and program settings.