How do I connect to my TV?

Plug In the Transmitter

1. Connect the power cord to the red “power” port on the back of the transmitter.
2. Plug the power cord adapter into a standard electrical outlet. Once the transmitter is connected, a white power light on the transmitter will turn on.

Connect the Transmitter to your TV 

To connect the transmitter to your TV, first check your audio source output options.

Digital Optical Audio Output

1. Select the Optical Audio Cord. Remove the plastic caps from both ends of the Optical Audio Cord.
2. Look for an “optical audio out” or “digital audio out” port on the back of your TV. Plug either end of the Optical Audio Cord into this port.
3. Plug the other end into the yellow “optical” port on the back of the transmitter.
   
   Please note: If you get static after connecting theOptical Audio Cord, you may need to change your TV’s digital audio setting from Dolby/DTS Digital to “PCM”. Every TV is different, but it should be similar to: Settings > Audio Settings > Digital Audio Out Format > Change from Dolby or DTS to PCM.

Analog Aux/3.5mm Audio Output

1. Select the 3.5mm Aux Audio Cord.
2. Find the “audio out” port on the back of your TV and plug in either end of the Aux Audio Cord.
3. Plug the other end into the green “analog” port on the back of the transmitter.
   
   Please note: If both the Optical and Aux are connected, the Optical takes priority.

Analog RCA Audio Output

• Select the 3.5mm RCA Audio Cord and the 3.5mm Aux Audio Cord. Connect the single (black) end of the RCA cord to your Aux cord.
• Find the “audio out” port on the back of your TV and plug in the dual (red and white) ends.
• Plug the other end into the green “analog” port on the back of the transmitter.