Charging the VOLT+
Place the VOLT+ in the charger facing forward. The blue light will turn on to indicate it is charging. You may need to push down on the aid or rock the aid back and forth to get it seated properly.
Close the case or leave it open — the hearing aids will charge either way. The blue lights will turn green when the aids are fully charged.
It takes approximately 2.5 hours to fully charge the VOLT+. Once battery is full, a sensor stops the charging process so there is no risk of battery degeneration if VOLT+ is left on the charger. On average, a full charge lasts 24-30 hours.
Note: The VOLT+ does not have to be turned off in order to charge, but we recommend turning it off to avoid whistling.
The charging case can charge the VOLT+ up to three (3) times without being plugged in. It takes approximately 4.5 hours to fully charge the case. When the case has less than 20% power, the middle light will flash green. When the case has more than 20% power, the light will be solid green.
The charger is made up of three pieces: a charging case, a cord, and a power adapter.
Connect the small end of cord to the opening on the back of charging case. Then connect the other end of cord (USB) to the power adapter and plug into a standard outlet.